Home


Product List

  Seasonal Products
 Rainwater harvesting
 Waterbutts,stands and diverters
  Flood & Flooding
  Greywater & Aquagrey
  Stormwater management
  Irrigation and garden watering
  Ground cover and geotextiles
  Drain covers and channels
  Compost and recycling
  Green roofs & Living walls
  Cesspits and sewerage
  Filter treatment-anti microbial
  Drain pipes and guttering
  Flood management
  Fuel storage and fuel saving
  Garden buildings and sheds
  Horse manege products
  Pipes and fittings
  Porous paving, permeable paving.
  Water saving products
  Energy saving products
  KLP recycled products
 

 

silt guardian 1300 litres, silt trap, storm infiltration
Our Products: Stormwater management
silt guardian 1300 litres, silt trap, storm infiltration
silt guardian 1300 litres, silt trap, storm infiltration
SKU: ch412
To get the best from your Silt Guardian it is important that you check the silt levels in the system this can be achieved more efficiently by the use of a silt monitoring device which we can provide as a factory fitted extra. This system will check when silt level is such that it needs emptying. However even in the event that you have a monitor fitted we still recommend that you check the filter regularly as this will blind with high levels of silt in suspension. If necessary it can replaced cheaply or as an interim cleaning programme it can be removed simply and cleaned off with warm soapy water and a jet washer on a low to medium setting and then simply relocated. Please note that the waste within these units is classed as special waste and must be removed by a licensed contractor. It is now illegal to tip the contents of a silt trap or separator without a license to do so. Price includes VAT. More details...
Price: £739.99
Save to my Wish List Tell a friend
Previous Item   Next Item
 
Product Details
Max flow-130 l /sec Capacity-1300 l pipework in/out 110mm The Silt Guardian is usually sited before an attenuation system to prevent silt/sand entering the system, particularly crate/box type and corrogated steel systems which are prone to silt blockage. In normal rainfall which accounts for more than 99% of all storms in the U.K. The Silt Guardians retention and filter system will retain and prevent the majority of silt passing through in suspension, even tiny particles of silt will become trapped in the Guardian's filter which is located on the outlet of the unit as shown. It works very simply.Silt entering the Guardian drops into the top section and then through into large vertical sump, the storage levels have been designed to store quantities of silt that complies with BS en858 for design of separators. The flow of surface water then has to pass up into the filter housing and through the filter. The filter gives the storm water a final polish before it enters the attenuation/storage system.