Home


Product List

  Seasonal Products
 Rainwater harvesting
 Waterbutts,stands and diverters
  Flood & Flooding
  Greywater & Aquagrey
  Stormwater management
  Irrigation and garden watering
  Ground cover and geotextiles
  Drain covers and channels
  Compost and recycling
  Green roofs & Living walls
  Cesspits and sewerage
  Filter treatment-anti microbial
  Drain pipes and guttering
  Flood management
  Fuel storage and fuel saving
  Garden buildings and sheds
  Horse manege products
  Pipes and fittings
  Porous paving, permeable paving.
  Water saving products
  Energy saving products
  KLP recycled products
 

 

VF2 Filter for Use Within Inspection Chambers
Our Products: Rainwater harvesting
VF2 Filter for Use Within Inspection Chambers
VF2 Filter for Use Within Inspection Chambers
SKU: etr387
VF2 filter for use within inspection chambers-for roof spaces up to 850 sqm - for roof spaces in excess of this please call 0151 639 0880 for information on the full range of VF filters ( VF1-6) More details...
Price: £1,695.64
Save to my Wish List Tell a friend
Previous Item   Next Item
 
Product Details
Description: Rainwater filter for bigger roof areas. Filter for installation in a concrete ring (Ø 1000 mm). Normally standard concrete shaft. The filter can be delivered to the site yet pre-assembled in the shaft. Due to the steep inclination of the lter cartridge the dirt is continuously cleaned away into the sewer. The connection to the sewer is installed at the shaft. The dirt falls down on the bottom of the shaft and is washed away with the next strong rainfall. Relative connection capacity according to DIN 1986 for roof areas up to 850 m. Because of a Bypass-Installation a bigger area can be connected. Max. Flow Rate Sieve insert 3,0/sec = 10,8 m cleaned water per hour. Inlet rainwater DN 200 Outlet into tank DN 150 Outlet into sewer DN 200 Height difference between inlet and outlet 320 mm. The filter has to be cleaned depending on the contamination 1 - 2 times during the year!