Home

Remember this is for one 2000 litre tank but the tank has been designed to allow multiple tanks joining to the end or to the side. Capacity can easily go from 2000 litres to 4000,6000,8000,10,000,12,000, 14,000 etc etc. By using this method, the installation is easily carried out by two men and no heavy lifting gear is required. All details are available on constituent parts on our pump section or on our filter section More details...

Price: £2,036.07

Product Details

Tank : as described in this section. Filter :Overflow siphon: Dirt particles that are lighter than water (e.g. pollen & dust) settle on the water surface as a floating layer. This floating layer is removed when the tank overflows by means of the overflow siphon in the tank. Also aids in mosquito prevention Calming inlet: Water from the filter is fed into the tank via the Calming Inlet to prevent swirling of the water, disturbance of fine sediments and to introduce oxygen at the bottom of the tank. Filter: SUPRA-Filter internal with straight outlet Over 95% water yield 0,35 mm mesh Suitable for roof surfaces up to 350 m² Connections DN 100 Direct feed :Box: Fully integrated rainwater harvesting control enclosure. Compliant with current water regualtions ( type AA air gap ) Designed and manufactured by Combined Harvesters in the UK. A simple and cost effective system used by major developers across the country. Additional parts to be considered; X1200 automatic pump or similar Floating extraction unit Cartridge filter post pump, used as additional filtration before the water enters the pipework within the building Washing machine filter CN100 or 150 non return valve for the overflow For more information or quotations for specific projects, please call one of our team Pump: The Divertron 1000 is a multi-stage pump, with integral electronics for sophisticated, high head use in domestic and industrial applications. This unique product is programmed to start and stop automatically when a valve or tap is opened or closed, while another programme will stop the pump automatically, in the event of dry running, thus protecting it from severe damage. It can be used for operation against the closed valve of a tap or a nozzle, hence it is ideal for sprinkling and washing applications. It has a stainless steel shaft and this is fi tted with a lip seal. It has an integral starting capacitor, a non-return valve and it is supplied with 15 metres of H07RN-F rubber power cable. The maximum depth of submersion is 15 metres Floating extraction: Pressure pipe float Non return valve Filter basket Tape : Pipe marking tape Labelling set Garden system : Tank: (Not included)-Any above or below ground tank. We will supply fitting in the price for any, just contact us with the type of tank you have or want. Pump: The Divertron 1000 is a multi-stage pump, with integral electronics for sophisticated, high head use in domestic and industrial applications. This unique product is programmed to start and stop automatically when a valve or tap is opened or closed, while another programme will stop the pump automatically, in the event of dry running, thus protecting it from severe damage. It can be used for operation against the closed valve of a tap or a nozzle, hence it is ideal for sprinkling and washing applications. It has a stainless steel shaft and this is fi tted with a lip seal. It has an integral starting capacitor, a non-return valve and it is supplied with 15 metres of H07RN-F rubber power cable. The maximum depth of submersion is 15 metres. All MDPE piping for inside the tank to get an external connection to the tank wall. Floating extraction inside the tank Gravity feed system: Loft tank: A30 air gap : WRAS approved Polyethylene tank manufactured by polytank to BS4213 and adapted by combined harvesters for use in a gravity rainwater harveting system. Each tank is supplied with mains top up assembly, overflow, vent 2 inlets and float switches for controlling pumped rainwater and mains water top up. Pump: Single phase stainless steel submersible pump used for draining wells, garages, cellars or places subject to flooding and garden irrigation ( clean water pump-max solids 10mm or 20mm for vortex type). Mechanical seal as standard. Comes with float switch or level sensor. Comes with 5 metres of cable for internal or 10 metres for external. Max immersion 5m. ISSO 9906. Max Head 7 metres / max flow 160l/m • Maximum liquid temperature: 40°C • Maximum immersion: 5 mts • Maximum passage of solids: 10 mm MATERIALS • Pump casing, impeller strainer, cover, casing cover and motor casing in AISI 304 • Shaft in AISI 304 • Double lip seal with interposed oil chamber • Asincronous 2 poles motor • Insulation class F • Protection degree IP68 • 1~230V +- 10% 50Hz • DNM 1” 1/4 Fine filter For fine filtering of rainwater after the pump. This is sensible if the water is going to be used for the washing machine. The mesh width of the 0.1mm fine filter retains the smallest dirt particles. Connections R 1" AG. Pipe marking tape and rainwater labelling set

Back to the top